MSA V Gard 950 Electrician Safety Helmet Set

MSA V Gard 950 Electrician Safety Helmet Overview:

The MSA V Gard 950 Electrician safety helmet is a balanced lightweight non vented with a 6 point ratchet suspension and a face shield certified for protection from arc flash. Great for uses where you have a risk to impact to the head, chemical splash, molten metal splash or electric arc to the face.

This MSA Electrician safety helmet is made from ABS for strength and lateral crush protection, face shield has premium anti scratch and anti mist coatings for enhanced durability and reduction in mist up. Complete with a 4 point chinstrap to prevent your safety helmet falling off your head and leaving you unprotected.

If you are an electrician and take your safety seriously then you would strongly consider the MSA V Gard 950 Electrician Safety Helmet set, this is everything you need to be safe above the neck!

Buy this MSA electrician hard hat now on our online store!

Complying with the following safety standard:

EN397 safety helmet
EN166 eye protection
GS-ET 29 electrical arc class 1, 4KA

Further information on the safety standards:

EN397

EN397 is the European Standard that specifies physical and performance requirements (including testing) for industrial safety helmets.

Testing procedure:

• Shock Absorption Test – A 5kg rounded striker is dropped on the crown of the helmet from 1m. The force transmitted to the head form cannot exceed 5KN.
• Resistance to Penetration Test – 3kg pointed striker dropped on the crown region, striker not allowed to contact the head form.
• Resistance to Flame Test – when exposed to a flame for 10 seconds and then removed, the shell must not set alight or self-extinguish within 5 seconds.

The relevant European standard can be found on the safety helmet, usually underneath the peak of the helmet so in this case look out for a EN397 standard for confirmation of performance.

Link to the MSA V Gard 950 on the MSA website.